SL-80
| Quantity: | |
|---|---|
The SL-80 pneumatic pick is a compressed air-powered breaking tool designed for hard rock fragmentation and concrete demolition in mining and heavy infrastructure projects. It operates with a 189 mm piston stroke to support deep penetration during construction operations. The manufacturer holds ISO 9001:2015 quality management system certification and has passed SGS factory audits, with production scope covering pneumatic pickaxes, air leg rock drills, and rock drill oil injectors. Full spare parts support and technical guidance are provided with every unit for commercial users.
Specifications/Name | SL-80 |
|---|---|
Piston Diameter | 57 mm |
Piston Stroke | 189 mm |
Percussive Frequency | 18.3 Hz |
N.W. | 37 kg |
Length | 733 mm |
Working Air Pressure | 0.63 Mpa |
Air Consumption | 0.63 MPA |
Air Tube Size | 19 mm |
Traction Diameter | 19 |
Bit Head Size | R32×152 mm |
Air Inlet Size | 3/4 mm |
Oil Feeder | 30 ml |
 |  |  |
 |  |  |
 |  |  |
The SL-80 pneumatic breaker runs entirely on compressed air. Compressed air enters the valve assembly through the air connection pipe, and the internal valve distributes airflow to the cylinder chamber above the piston. This process drives the hammer body to reciprocate up and down, striking the end of the steel shank to push the bit into concrete or rock and break material into fragments. The robust valve system maintains steady performance in dusty and high-vibration work environments, reducing unplanned downtime for construction project teams. The tool accepts R32×152 mm bits, and works with a 19 mm air tube and 3/4 mm air inlet. It requires only connection to a compressed air source to operate, with a simple structure that allows on-site personnel to set up and use the tool without complex training procedures.
Forged alloy steel components form the main structure of the SL-80 pneumatic pick. The front head adopts a dedicated design to extend service life under continuous impact, and a removable bushing is installed to protect the front head from wear during long-hour operation. A forged latch retainer enables quick chisel changes on site, reducing interruption to work progress. The 4-bolt handle configuration supports low running costs over the tool’s entire service life. An anti-vibration handle is available as an optional configuration, to reduce vibration transmission to operators’ arms during extended work sessions. The tool’s 37 kg weight and 733 mm length are sized for handheld operation in open-air infrastructure and mining work sites.
The SL-80 pneumatic breaker suits multiple industrial applications involving hard material fragmentation. In mining operations, it works on hard rock and complex mineral vein structures, supporting extraction work and site preparation tasks. For infrastructure construction, it is used for breaking reinforced concrete in road repair, bridge construction, and municipal engineering projects. It also applies to building foundation work sites, where it breaks high-strength concrete and hardened ground layers. The tool’s stable performance in dusty outdoor environments makes it compatible with open-air construction and mining sites with varying geological conditions.
The manufacturer maintains a large stock of spare parts for the SL-80 pneumatic breaker, covering wear components and structural parts for replacement. Technical guidance is provided for every unit, including operation instructions and routine maintenance support for commercial project teams. Universal accessory specifications also allow users to source compatible parts through local channels when needed.
For in-stock units, delivery can be arranged within 15 days after order confirmation. For larger volume orders, production and delivery preparation take up to 30 days. The manufacturer offers three primary freight modes for global shipment: sea freight for most bulk orders destined for regions including Africa, South America, and the Middle East; road or rail freight for landlocked neighboring countries; and air freight for urgent, lightweight spare part orders. Clients with designated shipping agents in China may arrange for their agents to coordinate with the manufacturer for cargo handover at the requested warehouse. Logistics tracking numbers are provided for all shipments for order follow-up.
 |  |
The manufacturer holds a large stock of spare parts for the SL-80 model, covering all wearable and structural components of the tool. Full parts support is provided along with every unit purchase.
For in-stock items, delivery is arranged within 15 days after order confirmation. Larger volume orders may require up to 30 days for production and shipment preparation.
Pricing remains stable throughout the year under normal conditions. Price adjustments may only occur under two circumstances: fluctuations in the US dollar exchange rate, or increases in labor or raw material costs that necessitate adjustment.
